<div dir="ltr"><div>Hi,</div><div><br></div><div>Jim Dean, W8UD, and I have successfully set up the Wires-X node on the BARC 440 repeater. This repeater will continue to support analog FM and digital System Fusion, but will now provide access to the Wires-X network through System Fusion. Wires-X allows you to talk around the world through your local repeater using crystal clear digital voice. There are Wires-X rooms set up that you can visit to meet with people. Usually these are accessed by simply sending a DTMF code for the room or simply selecting from a search list if your transceiver is Wires-X capable.<br></div><div><br></div><div>The BARC 440 repeater is at 443.6750+ with no CTCSS tone required for you to transmit. It is strongly recommended that you set up your analog FM transceiver to decode the 118.8 Hz to receive a transmission from the repeater. This will ensure that you do not hear the annoying digital signal when it hits the repeater.</div><div><br></div><div>Instructions for using Wires-X will be available soon on the BARC website at <a href="http://www.bellbrookarc.org">http://www.bellbrookarc.org</a>. Until then, Google is your friend!</div><div><br></div><div>Thanks!</div><div><br></div><div>John Westerkamp/W8LRJ</div><div>Treasurer and Education Coordinator</div><div>Bellbrook Amateur Radio Club<br></div></div>