[XWARN] BARC Wires-X is On-line!

[Sean Dickens]

Nice work John and Jim, that was quick!! Looking forward to trying it out

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: Reflector <reflector-bounces at xwarn.net> on behalf of John Westerkamp <westerkampj at gmail.com>
Sent: Tuesday, November 17, 2020 3:45:28 PM
To: barc <barc at bellbrookarc.org>
Cc: gcares at bellbrookarc.org <gcares at bellbrookarc.org>; reflector at xwarn.net <reflector at xwarn.net>
Subject: [XWARN] BARC Wires-X is On-line!

Hi,

Jim Dean, W8UD, and I have successfully set up the Wires-X node on the BARC 440 repeater. This repeater will continue to support analog FM and digital System Fusion, but will now provide access to the Wires-X network through System Fusion. Wires-X allows you to talk around the world through your local repeater using crystal clear digital voice. There are Wires-X rooms set up that you can visit to meet with people. Usually these are accessed by simply sending a DTMF code for the room or simply selecting from a search list if your transceiver is Wires-X capable.

The BARC 440 repeater is at 443.6750+ with no CTCSS tone required for you to transmit. It is strongly recommended that you set up your analog FM transceiver to decode the 118.8 Hz to receive a transmission from the repeater. This will ensure that you do not hear the annoying digital signal when it hits the repeater.

Instructions for using Wires-X will be available soon on the BARC website at http://www.bellbrookarc.org. Until then, Google is your friend!

Thanks!

John Westerkamp/W8LRJ
Treasurer and Education Coordinator
Bellbrook Amateur Radio Club
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.xwarn.net/pipermail/reflector_xwarn.net/attachments/20201117/5e866b02/attachment.htm>